Xinmei XMSS-705D-HDPE pure electric motor introduction

Xinmei stacking barrel blow molding machine XMSS-705D-HDPE pure electric motor, equipped with 100-point thickness controller, automatic overflow removal device, automatic product removal device, Xinmei patented material network. Electric control system, fast mold change device, linear slide rail, fast and convenient mold change design. 3-layer extrusion system. Crankshaft clamping structure, the clamping force is in the center of the mold to ensure average force, crank arm bearing, greater clamping force. The safety door is equipped with a Schmersal plug-in switch safety interlock device, the machine is equipped with an emergency stop device on all 4 sides, and the front frame and hydraulic station of the machine are equipped with lighting. There is a staircase to go up and down the extrusion platform for easy maintenance. The mold transfer high-speed proportional valve can adjust the speed and pressure ratio. When manual, it uses an independent hydraulic system control, low pressure, low flow, to ensure safe operation. Equipped with a symmetrical automatic lubrication system. Independent Festo® regulating valve, 2-stage control of barrel air pressure and flow, control of barrel air pressure, vacuum air pressure, blowing air pressure, residual material cold air. Geometric oblique blowing group, containing a high and low blowing ratio control system, high and low pressure 2-way air source.

Dual die head

Blow needleAutomatic overflow removal device

Fully intelligent electric adjustmentIntelligent motor clamping device

Finished product removal robotFully intelligent electric adjustment