Precautions for automatic blow molding machine maintenance

The rapid development of automatic bottle blowing machine replaced semi-automatic bottle blowing machine and became the standard of modern bottle blowing machine. The automatic blow molding machine is easy to operate and does not require manual intervention, but there are still some precautions in the start-up process and operation. What are the operating steps and precautions of the automatic bottle blowing machine? And the precautions for the maintenance of the automatic bottle blowing machine in daily work

The following editor, combined with years of after-sales maintenance experience of the blow molding machine, will share with you the operating steps and precautions of the automatic blow molding machine to help users better use the automatic blow molding machine.
Operation procedure of automatic bottle blowing machine.

Precautions for automatic blow molding machine maintenance:

1. Test whether the physical environment and the basic equipment environment meet the requirements. Power supply, pipelines, high pressure, low pressure display, etc. are all normal, and whether the operating environment meets the production regulations

2. After the above is satisfied, turn on the power and add 2-3 seconds to the automatic blowing machine.

3. Click to start and check whether the lamp in the controller is heated normally. Under normal circumstances, the lamp is heated for 2-3 minutes, and the lamp temperature is consistent with the production requirements. In addition, in winter, the temperature of the general environment is lower and the heating time is longer, and the temperature in summer is higher, and the heat can also be slightly heated.

4. Turn on the equipment and blow the bottle normally. Automatic blow molding machine Note: There is no bottle on the blow molding machine. Check the preform in the preform, if not, add the preform. However, if there is a blank, the blank can not be automatically carried out, check whether the feeding device is normal, and check the equipment alarm code.

Please consult the manufacturer to further resolve this issue. Blowing out (burst), if the equipment is used normally, it is generally because the ambient temperature is high, so we need to cool the working environment. Regular maintenance of the automatic blow molding machine. Generally speaking, after the peak season, we need to maintain the automatic blow molding machine for a long time. We need to complete the repair time and precautions, such as cleaning the mold equipment, adding lubricating oil, cleaning the mold, etc.