Dongguan second-hand automatic bottle blowing machine

Second-hand fully automatic blow molding machine Different injection molding machines have a certain gap, and there is a certain gap in pressure, speed, time, position and temperature. When the machine tonnage is different, of course there is no effect; the clamping force of large machines may be larger. , May lead to poor exhaust products, filling may lead to adhesion. The crack at the top is a phenomenon. For some heat allergic materials, because your temperature is the same premise, the barrel is too large, resulting in high temperature of the material, yellow or discoloration of the product and other factors.

Dongguan blow molding machine, good molds, materials with a wide temperature range, and the color of the product is not a big problem, and it is not a big difference in the size of the machine. The mechanical action of hydraulic machinery is not very accurate, the adjustment of parameters depends on experience, the motor is more accurate, and the basic parameters remain unchanged.

Fully automatic bottle blowing machine Generally speaking, the parameters of the injection molding machine are that the product mold and the mold are relatively large, and the clamping force should be increased, that is, to form a relatively closed space to ensure injection, so that more flash of the product will not be produced (Burr), which affects the appearance and use of the product, the relationship between injection speed, pressure, position, material and temperature, using all of your product structure and product, the situation is much more complicated, when you do not give some material parameters The product and the previous product, not the answer. I can only help you here. If there are more specific questions, you can communicate again. I hope you can adapt to the working environment as soon as possible and complete the work efficiently.